
Mob:0086-18764778812
Email:jnjmzm@jinyaojn.com
Emergency treatment of excavators
First, the emergency treatment of the excavator in the water Excavators are sometimes easily caught in water during construction. In...
Three precautions for repairing electrical components of Komatsu PC200 excavator
1, wiring harness and connector processing A wire harness consists of a wire that is connected from one component to another, a connector...
Drivers must see the excavator fire small seconds
During the operation and maintenance of the excavator, if you do not operate it carefully, it may cause a fire and cause a disaster! In...
Excavator - hydraulic pump noise analysis and maintenance
After the excavator has been in use for a long time, some excavators may have excessive noise from the hydraulic pump. This phenomenon is...
Five tips for lifting and reloading with an excavator
Occasionally, it is not uncommon for earthmoving engineers to hoist and place heavy objects such as pipes or trench boxes on the project....
The most practical excavator repair and maintenance technical methods
The purpose of regular maintenance of the excavator is to reduce machine failure, extend machine life, reduce machine downtime, improve...
Extend the engine life of excavators
Driving excavators work in places with excessive dust and smoke. The operators will take various protective measures, such as masks and...
Excavator computer board working principle and maintenance
The excavator computer board (scientific name controller) is called the "brain" of the control machine. It plays a vital role in the...
Increase knowledge! The excavator has 7 reasons for losing the arm, and 5 solutions are here!
Excavators often have big and small problems, and it is really a headache! I don't know if the friends have encountered the excavator's...
Common malfunctions of Hammer
Operation errors, nitrogen leakage of the breaker, improper maintenance and other phenomena can cause failures in the working valve of...
The working principle and correct use of the breaker
First, the structure of the breaker The main work of the breaker is composed of cylinders, piston rods, drill rods, reversing valves,...
Which level do you do for excavator maintenance?
In order to better use the excavator to prevent various failures, more attention should be paid to the use and maintenance of the...
Excavator hydraulic pump maintenance use note
The precautions for using the hydraulic pump of the excavator, the addition of the hydraulic pump and the air discharge method of the...
Komatsu excavator handling precautions
1 The electronic spare parts system checks if the wire is damaged, loose or missing. 2 The fuel system drains and impurities from the...
Snowy day excavator can't start, you must remember these six strokes
It’s beautiful in snowy days, but the bad weather, such as low temperature and icing, is a very painful working environment for our...
Tibet Komatsu 75uu excavator owners share winter maintenance
(1) Adding antifreeze must be added to the authentic area temperature and we generally add -35 °C) (2) For the winter hydraulic oil, the...
Excavator regular maintenance content
1. Fuel management Different grades of diesel oil should be selected according to different ambient temperatures; diesel oil should not...
Komatsu excavator must do this for long-term parking, otherwise the engine will be cylinder
Friends who have Komatsu excavators know that due to insufficient engineering, weather and seasons, construction machinery and equipment...
How to repair the excavator
First, the engine water temperature is high, after the thermostat is removed, the small hole below the thermostat seat is plugged with...



















