Nine kinds of buckets for excavators, you may not have used them all?

As one of the most favored equipments in the engineering machinery industry, excavators are widely used in mining, water conservancy, urban construction and other occasions. Users in the industry know that excavators will choose different tooling accessories when they work in different occasions. Common excavator accessories such as buckets, breakers, rippers, hydraulic clamps, etc., only with the selection of accessories, can get high-speed and effective working ability for various working conditions. But you may not know, for a variety of working conditions There are more than ten categories of excavator buckets, each of which has its special features. The following Mingde machinery will let you know the nine most common excavator buckets. If you own them, you will definitely let them Your device is even more powerful!

Earth bucket

The earthwork bucket is a common standard bucket for small and medium-sized excavators. The standard plate thickness is used, and there is no obvious reinforcement process on the bucket body. The features are: large bucket capacity, large bucket area, and large stacking. The surface has a high filling factor, high work efficiency and low production cost. It is suitable for excavation of general clay and light working environment such as sand, soil and gravel. It is also called earthwork bucket. The disadvantage is: The thickness of the sheet is small, the reinforcement plate is lacking, the anti-wear plate is strengthened, and the life is short.

Rock bucket

The shape of the rock bucket is very similar to that of the earth bucket. Unlike the earth bucket, the rock bucket is entirely made of thickened plates. The bucket teeth, the bucket wings, the sides of the bucket teeth, and the bottom of the bucket are all reinforced, and the rock bucket is added. The guard plate is equipped with a protective plate, and the tooth holder is also made of rock.

The unique protection and reinforcement of the excavator spare parts rock bucket makes it highly resistant to abrasion and bending. It is suitable for heavy working environments such as loading of stones, secondary stones, weathered stones, hard stones, or ore after blasting. It is widely used in harsh conditions such as ore mining.

Water bucket

As the name implies, the ditch bucket is mainly used to excavate the trenches required for water conservancy, roads, agriculture and some pipelines.

Because of different job requirements, the water bucket has various shapes and widths, such as rectangles, trapezoids, triangles, and the like. It is characterized by one molding, generally does not require trimming, and the work efficiency is relatively high.

Loose soil bucket

In order to meet the excavation work of greater strength, high-strength loose soil teeth are installed on the loose soil bucket, and the loose soil can be completed once, and the work efficiency is high. It is mainly used in the working environment of crushing, excavation and loading of hard soil, secondary stone and weathered stone. It generally has single or multi-toothed teeth, sharp teeth and easy to break ground. The downside is that the fighting capacity is relatively small.

Grill bucket

It is similar in design to the standard bucket, but its bottom is lattice-shaped, suitable for separating loose material, excavation and separation. Widely used in municipal, agricultural, forestry, water conservancy, earth and stone works, etc.

Cleaning bucket (inclined bucket)

Before talking about cleaning the bucket, let's talk about the dredging bucket. The dredging bucket is also called the mud bucket. There is no tooth and the width is large. It is very suitable for the surface finishing of slopes requiring large capacity, dredging work of rivers, ditches, etc.

Mud

Under all the characteristics of the mud bucket, the tilting bucket can also control the tilting angle of the rotating bucket to adapt to different working environments through the action of the cylinder. The maximum tilting angle is 45 degrees, and the work can be performed without changing the position of the excavator. Mechanical wear and fuel consumption make it easy to do precise work that cannot be done by ordinary buckets, improving work efficiency.

Tilting bucket

Therefore, it is suitable for the trimming of slopes and other planes, as well as brushing slopes, uniform plane retreats, large-capacity dredging and cleaning of rivers and ditches. However, the inclined bucket is not suitable for heavy working environments such as excavation of hard soil and hard rock.

Thumb grip

The thumb gripper does not look like a person's hand. The thumb gripper has a rigid link that is attached to the excavator stick using a welded bracket.

Similar to the baffle in front of the bucket, it reduces the possibility of material falling down or can directly grab material. The bucket is retracted into the bucket to pick up, grab, sort and process various types of materials and objects. It is suitable for various working conditions, practical and safe.

Grab

According to the shape, the grab can be divided into a shell grab and a orange grab. If you look at the name, you can make up the brain. A shell grab consists of two complete bucket-like members like a shell. The orange flap grab consists of three or more jaws.

The working principle of the grab is the hydraulic cylinder drive, which drives the opening and closing action to grab the material and complete the work. It is suitable for foundation pit excavation, deep pit excavation and loading of loose materials such as coal sand, gravel and mud, especially in some environments where space is limited. Grabs can be excavated and loaded on the side.

The disadvantage is that the spare parts excavation strength is weak, it is not suitable for relatively hard land, and only loose materials can be grabbed.

Four in one bucket

The four-in-one bucket can realize the functions of loading, scraping and clamping operations during the working process. It has all the functions of buckets such as mud buckets, rotary buckets and earth buckets. It also uses hydraulic cylinders to automatically unload without the need for a bucket. Material, convenient and fast. The disadvantage is not suitable for ditching, trenching and other heavy working environment, partial technology flow.

These nine kinds of excavator buckets are widely used in practical work. As the saying goes, the Eight Immortals cross the sea to show their magical powers. Every bucket introduced here also has its own magical power. Choosing the right bucket can not only work. The effect of getting twice the result with half the effort, and the best working results can be achieved. It really is two birds with one stone. https://jnjmzm.wixsite.com/sdjygcjx