How should the newly purchased excavator be maintained?

After the excavator owner buys a new excavator, before the excavator works, first read the operation instructions of the excavator spare parts carefully, and use and operate the excavator strictly in accordance with the requirements of the manual. In particular, pay attention to the following points:

1 When using the excavator to use fuel, be sure to use the fuel that matches the model of the Komatsu excavator spare parts (the manual has it, the owner can buy it directly).

2 Before adding fuel to the excavator, it must be precipitated and filtered. The excavator oiler should be clean and free of impurities.

3 Lubricants should be kept clean, the number of additions should be sufficient, and they should be exchanged regularly. The application grades should be consistent with the regulations.

4 Air filter should always pay attention to maintenance.

5 Be careful to add cooling water, especially if the engine is running out of water. If you find that the engine lacks cooling water, add it in time.

6 Always check carefully, tighten the relevant bolts and nuts, especially the connecting rod bolts, the bolts on the drive shaft and the lock nut on the flywheel, the tightening nut of the wheel, etc.

7 Check the excavator water tank, fuel tank and check if there is a simple excavator repair tool before the excavator works. Original excavator spare parts

8 The new machine usually replaces the oil and all the filter elements in 50 hours. The gear oil and hydraulic oil can be delayed after replacement. The air filter and machine filter should be maintained and replaced regularly. Every day, the whole car should be buttered once.

9 1000 hours replacement of final transmission gear oil, engine oil, oil filter, diesel filter, oil-water separator, hydraulic oil inlet and outlet filter cartridge and other filter elements.

10 2000 hours replacement of hydraulic oil, final drive, rotary gear oil, engine oil, hydraulic oil inlet, oil filter, pilot filter, oil filter, diesel filter, oil water separator, but also need to add butter (grease) every day, view Oil level, sometimes need to check the cooling water level.

11 Maintenance is divided into 5 parts, each according to the relevant manual or corresponding specifications: engine + running part + hydraulic part + frame action part + excavating bucket shovel. The focus is on lubrication, cleaning and observation of various parts. Especially oil and hydraulic oil maintenance Clean, effective lubrication of the rotating shaft. https://jnjmzm.wixsite.com/sdjygcjx