Excavator four tips

The novices who entered the digging machine circle want to learn from the old drivers. I hope that I can learn the quintessence of the various operations of the excavator in the shortest time. I can accidentally hold the rice bowl and go to the peak of life.

However, the operation of the excavator hydraulic spare parts is a technical activity after all. Don't think that it is easy to overcome all kinds of engineering activities by simply playing with the two handles. There are many tricks here! Today, we will introduce excavation for everyone. Four tips for the machine, help the novice friend to operate the excavator more quickly.

First, the excavator on the board

Relatively speaking, the slabs with ladders are especially popular, and the upper and lower are also relatively easy. As long as the cautiousness of the accident is basically zero, the small excavator must climb the slab without the ladder, the difficulty coefficient is large. Over.

Master tells about the four tips of the excavator spare parts

First of all, before preparing the board, don't bother. First adjust the angle of the excavator. The alignment of the chain plate and the flatbed must be guaranteed. Then turn the excavator and support the body with the boom. The whole process must be slow. Otherwise, it is easy to go wrong, and must be carefully observed while reversing!

Second, dig T-shaped ditch

The T-shaped ditch is a very challenging task, and the requirements must be precise. Therefore, if the newbie encounters it, the scalp will be numb, for fear that a certain action will not be done, leading to abandonment.

Many old drivers will take a ride on the ditch and start digging from the T-to-wall contact. This is also a good way, but it should be noted that this method is not suitable for sand land. When digging, do not use the arm. Strongly retracting the soil, it is easy to offset when the excavator is not handled well. It is necessary to use the bucket to dig the groove shape once and then, and then the water will be formed.

Third, leveling work

It can be said that the experience of leveling work is that experience and practice make perfect. If someone tells you that the leveling work has a fast theoretical knowledge, it is basically a bluff.

The most basic operation method of this komatsu excavator spare parts is slow! Especially for novices, the shovel tip needs to scrape the soil slowly and accurately. It can slow down and dig as long as possible.

As for how to accurately observe the unevenness, it needs to be carefully observed. If it is high, it will be scraped down. If it is low, it needs to push a little soil with a bucket, and slowly find a reasonable angle and strength. Practice makes perfect!

Fourth, loading work

The driver who doesn't want to be quick to pick up the car is not a good player, but most of the newcomers are eager to make a success. If you want to get rid of the spell that is too slow to load, often you can't get it!

First of all, everyone must stop the excavator, so whether it is rotating or other movements, it will be fast and stable, and then reduce the extra movements. When digging the soil, the bucket should be parallel with the soil as much as possible, then the arm will be shoveled, so that the bucket It can be filled and the movement is smooth.

When lifting the soil on the car, try to raise the big arm and then dump the soil. Do not push the arm without pushing it, because the soil piled on the bucket will fall off in advance.

In fact, in the final analysis, the operation of the excavator relies on everyone's intentions and care. Every old driver is from the novice all the way to climb and roll, and more to learn more and learn more, I believe that every novice can become an old driver! https://jnjmzm.wixsite.com/sdjygcjx